Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 218

support the concept of timeout, subsequent entries in the list are never attempted. For example, the local authentication method implementation does not supply a time-out value. If a list contains the local method, followed by the radius authentication method, the radius method is not attempted. Once an APL is created, a reference to that APL can be stored in the access line configuration to determine how specific components should authenticate users. The APL and associated component ID are stored together. A single APL can be referenced by multiple users and components. The administrator can enable/disable/reorder authentication methods on a per method basis (see above). Commands in this Chapter This chapter explains the following commands: aaa authentication dot1x enable authentication default aaa authentication enable enable password aaa authentication login ip http authentication aaa authorization network ip https authentication default radius aaa ias-user username login authentication aaa ias-user username password (aaa IAS User Configuration) clear (IAS) password (Line Configuration) password (User EXEC) show aaa ias-users show authentication methods show users accounts show users login-history username aaa authentication dot1x default Use the aaa authentication dot1x default command in Global Configuration mode to specify an authentication method for 802.1x clients. Use the no form of the command to return the authentication method to its default settings. Syntax aaa authentication dot1x default {radius| ias|local|none} 218 AAA Commands