Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 245

containing this ACL rule is applied to an interface or bound to a VLAN, then the ACL rule is applied when the time-range with specified name becomes active. The ACL rule is removed when the time-range with specified name becomes inactive. access-list list-name {deny | permit} {every | {{icmp | igmp | ip | tcp | udp | number} any| srcip srcmask[{eq {portkey | 0-65535}] dstip dstmask [{eq {portkey | 0-65535}] [precedence precedence | tos tos tosmask | dscp dscp] }[log] [time-range time-range-name] [assign-queue queue-id] [{mirror | redirect} interface-id] no access-list list-name Parameter Description Parameter list-name deny | permit every eq number srcip srcmask dstip dstmask portvalue portkey log time-range-name Description Access-list name up to 31 characters in length. Specifies whether the IP ACL rule permits or denies an action. Allows all protocols. Equal. Refers to the Layer 4 port number being used as match criteria. The first reference is source match criteria, the second is destination match criteria. Standard protocol number. Protocol keywords icmp,igmp,ip,tcp,udp. Source IP address. Source IP mask. Destination IP address. Destination IP mask. The source layer 4 port match condition for the ACL rule is specified by the port value parameter (Range: 0-65535). Or you can specify the portkey, which can be one of the following keywords: domain, echo, ftp, ftpdata, http, smtp, snmp, telnet, tftp, and www. Specifies that this rule is to be logged. Displays the name of the time-range if the ACL rule has referenced a time range. ACL Commands 245