Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 1318

the link-local scoped IANA multicast address ff02::101 (reserved for SNTP) for server packets.The client logic to handle packet contents doesn't change with support for IPv6 networks. Commands in this Chapter This chapter explains the following commands: show sntp configuration show sntp server show sntp status sntp authenticate sntp authentication-key sntp broadcast client enable sntp client poll timer sntp server sntp trusted-key sntp unicast client enable clock timezone hours-offset no clock timezone clock summer-time recurring clock summer-time date no clock summer-time show clock show sntp configuration Use the show sntp configuration command in Privileged EXEC mode to show the configuration of the Simple Network Time Protocol (SNTP). Syntax show sntp configuration Default Configuration This command has no default configuration. Command Mode Privileged EXEC mode User Guidelines This command has no user guidelines. 1316 Clock Commands