Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 1249

Use the no form of this command to remove the route from the tracked list or to restore the priority decrement to its default. When removing a tracked IP route from the tracked list, priority should be incremented by the decrement value if the route is not reachable. Syntax vrrp group track ip route ip-address/prefix-length [ decrement priority ] no vrrp group track ip route ip-address/prefix-length Parameter Description Parameter group ip-address/prefix-length priority Description The virtual router identifier. (Range: 1-255). Specifies the route to be tracked. Priority decrement value for the tracked route. (Range: 1-254). Default Configuration There are no routes tracked by default. The default decrement priority is 10. Command Mode Interface Configuration (VLAN) mode. User Guidelines There are no user guidelines for this command. Example The following example adds the route 2.2.2.0/24 to the virtual router tracked list (with a priority decrement value of 20). console(config-if-vlan10)#vrrp 1 track ip route 2.2.2.0/24 decrement 20 Virtual Router Redundancy Protocol Commands 1249