Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 1488

Default Configuration No community is defined. Default to read-only access if not specified. Command Mode Global Configuration mode User Guidelines You can not specify viewname for su, which has an access to the whole MIB. You can use the view name to restrict the access rights of a community string. When it is specified: • An internal security name is generated. • The internal security name for SNMPv1 and SNMPv2 security models is mapped to an internal group name. • The internal group name for SNMPv1 and SNMPv2 security models is mapped to a view name. If ro is specified, then read-view and notify-view are mapped. If rw is specified, then read-view, notify-view, and write-view are mapped. The community name may include any printable characters except a double quote or question mark. Enclose the string in double quotes to include spaces within the name. The surrounding quotes are not used as part of the name. The CLI does not filter illegal characters and may accept entries up to the first illegal character or reject the entry entirely. Example The following example configures community access string public to permit administrative access to SNMP at an administrative station with IP address 192.168.1.20. console(config)# snmp-server community public su ipaddress 192.168.1.20 1484 SNMP Commands