Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 199

this case, the CLI suppresses repeated events from the same source and instead the CLI records one event within a period of time and includes that count as part of the log. Management ACL In addition to user access control, the system also manages access for in-band interfaces. The system allows individual hosts or subnets to access only specific management protocols. The user defines a management profile, which identifies management protocols such as the following: • Telnet. • SSH and the keying information to use for SSH. • HTTP. • HTTPS and the security certificate to be used. • SNMPv1/v2c and the read and read/write community strings to be used. • SNMPv3 and the security information for used this protocol. For each of these management profiles, the user defines the list of hosts or subnets from which the management profiles may be used. Other CLI Tools and Capabilities The CLI has several other capabilities associated with its primary functions. Terminal Paging The terminal width and length for CLI displays is 79 characters and 25 lines, respectively. The length setting is used to control the number of lines the CLI will display before it pauses. For example, the CLI pauses at 24 lines and prompts the user with the -more- prompt on the 25th line. The CLI waits for the user to press either or any other key. If the user presses any key except , the CLI shows the next page. A key stops the display and returns to the CLI prompt. Boot Message The boot message is a system message that is not user-configurable and is displayed when the system is booting. Displayed information includes the following: Using the CLI 199