Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 1405

passwords strength max-limit repeatedcharacters Use this command to enforce a maximum repeated characters that a password should contain. If password has repetition of characters more than the configured max-limit, it fails to configure. The valid range is 0-15. The default is 0. A maximum of 0 means again disabling the restriction. Use the no form of this command to reset the maximum repeated characters to the default value. Syntax passwords strength max-limit repeated-characters 0-15 no passwords strength max-limit repeated-characters Parameter Description This command does not require parameter descriptions. Default Behavior The default value is 0. Command Mode Global Configuration User Guidelines This command has no user guidelines. Example console(config)# passwords strength max-limit repeated-characters 3 passwords strength minimum character-classes Use this command to enforce a minimum number of character classes that a password should contain. Character classes are uppercase letters, lowercase letters, numeric characters and special characters. The valid range is 0-4. The default is 0. If a value of 0 is configured then no character class checking is Password Management Commands 1401