Dell PowerEdge M520 Dell PowerConnect M6220/M6348/M8024/M8024-k CLI Referen - Page 538

Example The following example displays how to enable the LLDP receive capability. console(config-if-1/0/3)#lldp receive lldp timers Use the lldp timers command in Global Configuration mode to set the timing parameters for local data transmission on ports enabled for LLDP. To return any or all parameters to factory default, use the no form of this command. Syntax lldp timers [interval transmit-interval] [hold hold-multiplier] [reinit reinitdelay] no lldp timers [interval] [hold] [reinit] • transmit-interval - The interval in seconds at which to transmit local data LLDPDUs. (Range: 5-32768 seconds) • hold-multiplier - Multiplier on the transmit interval used to set the TTL in local data LLDPDUs. (Range: 2-10) • reinit-delay - The delay in seconds before re-initialization. (Range: 1-10 seconds) Default Configuration The default transmit interval is 30 seconds. The default hold-multiplier is 4. The default delay before re-initialization is 2 seconds. Command Mode Global Configuration mode User Guidelines This command has no user guidelines. 538 LLDP Commands