Dell PowerEdge R440 EMC Installation and Service Manual 1 - Page 57
Optional front bezel, Removing the front bezel
View all Dell PowerEdge R440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
• Key to the bezel lock The key is required only if your system includes a bezel. • Phillips #1 screwdriver • Phillips #2 screwdriver • Torx #T30 screwdriver • Torx #T8 screwdriver • Wrist grounding strap Optional front bezel Removing the front bezel The procedure to remove the front bezel with and without the LCD panel is the same. Prerequisites Follow the safety guidelines listed in Safety instructions. Steps 1. Unlock the bezel by using the bezel key. 2. Press the release button, and pull the left end of the bezel. 3. Unhook the right end, and remove the bezel. Figure 17. Removing the front bezel with the LCD panel Installing the front bezel The procedure to install the front bezel with and without the LCD panel is the same. Prerequisites Follow the safety guidelines listed in Safety instructions. Steps 1. Locate and remove the bezel key. NOTE: The bezel key is part of the LCD bezel package. Installing and removing system components 57