Dell PowerEdge R440 EMC Installation and Service Manual 1 - Page 85
Installing the processor into a processor and heat sink module
View all Dell PowerEdge R440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Figure 45. Removing the processor bracket Next steps Install the processor into the processor and heat sink module. Installing the processor into a processor and heat sink module Prerequisites Follow the safety guidelines listed in Safety instructions Steps 1. Place the processor in the processor tray. NOTE: Ensure that the pin 1 indicator on the processor tray is aligned with the pin 1 indicator on the processor. 2. Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on the bracket. NOTE: Ensure that the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing the bracket on the processor. NOTE: Ensure that the processor and the bracket are placed in the tray before you install the heat sink. Installing and removing system components 85