Dell PowerEdge R440 EMC Installation and Service Manual 1 - Page 71
Installing a 2.5-inch drive into a 3.5-inch drive adapter, Removing a 3.5-inch drive adapter from
![]() |
View all Dell PowerEdge R440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Installing a 2.5-inch drive into a 3.5-inch drive adapter Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Remove the 3.5-inch drive adapter from the 3.5-inch hot swappable drive carrier. Steps 1. Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter. 2. Using a Phillips #2 screwdriver, secure the 2.5-inch drive to the 3.5-inch drive adapter. Figure 33. Installing a 2.5-inch drive into a 3.5-inch drive adapter Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. If installed, remove the front bezel. 3. Remove the 3.5-inch drive carrier from the system. Steps 1. Using a Phillips #1 screwdriver, remove the screws from the rails on the drive carrier. 2. Lift the 3.5-inch drive adapter out of the 3.5-inch drive carrier. Installing and removing system components 71
![](/manual_guide/products/dell-poweredge-r440-emc-installation-service-manual-4fc47c7/71.png)