Dell PowerEdge R440 EMC Installation and Service Manual 1 - Page 58
System cover, Removing the system cover
View all Dell PowerEdge R440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
2. Align and insert the tabs on the bezel into the slots on the system. 3. Press the bezel until the button clicks in place. 4. Lock the bezel by using the key. Figure 18. Installing the front bezel with the LCD panel System cover Removing the system cover Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Turn off the system, including any attached peripherals. 3. Disconnect the system from the electrical outlet and disconnect the peripherals. Steps 1. Using a 1/4 inch flat head or a Phillips #2 screwdriver, rotate the latch release lock counter clockwise to the unlocked position. 2. Lift the latch till the system cover slides back and the tabs on the system cover disengage from the guide slots on the system. 3. Hold the cover on both sides, and lift the cover away from the system. 58 Installing and removing system components