Dell PowerVault MD1000 Hardware Owners Manual - Page 11

Back-Panel Indicators and Features, Power Supply and Cooling Fan Features. - installation

Page 11 highlights

Table 1-3. Drive Carrier Status LEDs LED Description Off Slot empty, drive not yet discovered by server, or an unsupported drive is present Steady green Drive is online Green flashing (250 milliseconds Drive is being identified or is being prepared for removal [ms]) Green flashing On 400 ms Off 100 ms Drive rebuilding Amber flashing (125 ms) Drive failed Green/amber flashing Green On 500 ms Amber On 500 ms Off 1000 ms Predicted failure reported by drive Green/amber flashing Green On 3000 ms Off 3000 ms Amber On 3000 ms Off 3000 ms Drive being spun down by user request or other nonfailure condition Back-Panel Indicators and Features Figure 1-4 shows the back-panel features of a fully populated enclosure containing both enclosure management modules (EMMs) and two power supply/cooling fan modules. The enclosure requires at least one EMM to be installed; if only one EMM is installed, it must reside in the primary (left, as seen from rear of enclosure) EMM bay. Both power supply/cooling fan modules must be installed. However, the enclosure can run temporarily on one power supply/cooling fan module. For more information, see "Power Supply and Cooling Fan Features." About Your System 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

About Your System
11
Back-Panel Indicators and Features
Figure 1-4 shows the back-panel features of a fully populated enclosure containing both enclosure
management modules (EMMs) and two power supply/cooling fan modules. The enclosure requires at
least one EMM to be installed; if only one EMM is installed, it must reside in the primary (left, as seen
from rear of enclosure) EMM bay. Both power supply/cooling fan modules must be installed. However,
the enclosure can run temporarily on one power supply/cooling fan module. For more information, see
"Power Supply and Cooling Fan Features."
Table 1-3.
Drive Carrier Status LEDs
LED
Description
Off
Slot empty, drive not yet discovered by server, or an
unsupported drive is present
Steady green
Drive is online
Green flashing (250 milliseconds
[ms])
Drive is being identified or is being prepared for removal
Green flashing
On 400 ms
Off 100 ms
Drive rebuilding
Amber flashing (125 ms)
Drive failed
Green/amber flashing
Green On 500 ms
Amber On 500 ms
Off 1000 ms
Predicted failure reported by drive
Green/amber flashing
Green On 3000 ms
Off 3000 ms
Amber On 3000 ms
Off 3000 ms
Drive being spun down by user request or other nonfailure
condition