Dell PowerVault MD1000 Hardware Owners Manual - Page 17
EMM Thermal Shutdown, Power Supply and Cooling Fan Features - power supply 2
View all Dell PowerVault MD1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
EMM Thermal Shutdown If critical internal temperatures are reached, the enclosure will be shut down automatically via either a thermal shutdown command issued by the EMM firmware or via a command from Server Administrator. Power Supply and Cooling Fan Features Your storage enclosure supports two integrated, hot-pluggable power supply/cooling fan modules. Each module contains two separate cooling fans. Both modules must be installed to ensure proper cooling. The enclosure requires at least three of the cooling fans to operate to avoid overheating. CAUTION: A power supply/cooling fan module can be removed from a powered-on enclosure; however, the enclosure will shut down if overheating occurs. A power supply/cooling fan module can be replaced without powering down the enclosure. For information on removing and replacing the modules, see "Removing and Installing the Power Supply/Cooling Fan Module." Figure 1-8 shows the power supply/cooling fan module features and LED indicators. Table 1-5 lists the LED indicator descriptions. Figure 1-8. Power Supply and Cooling Fan Module LED Features and Indicators 1 2 3 4 5 1 DC power LED 3 2 Power supply/cooling fan fault 4 LED AC power LED cooling fans (2) 6 5 AC power connector 6 on/off switch About Your System 17