Dell PowerVault MD1000 Hardware Owners Manual - Page 36
Installing an EMM Module Cover in an Empty Bay, Installing and Removing an EMM Module Cover
View all Dell PowerVault MD1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing an EMM Module Cover in an Empty Bay If your enclosure configuration calls for a single EMM, the empty EMM bay must contain a module cover to ensure proper airflow. Installing and Removing an EMM Module Cover 1 Align the edges of the module cover with the edges of the EMM bay (see Figure 3-6). 2 Push the module cover into the bay until it snaps into place. 3 To remove the module cover, pull out on the thin tabs on each end of the cover and slide the cover out of the EMM bay. Figure 3-6. Removing and Installing an EMM Module Cover Removing and Installing the Power Supply/Cooling Fan Module Your enclosure supports two separate modules containing an integrated power supply and two cooling fans. While the enclosure can operate temporarily with only one functional power supply, both cooling modules (with two fans each) must be present for proper cooling. Three of the four fans must be operational to avoid overheating of the enclosure. NOTICE: A single power supply/cooling module can be removed from a powered-on enclosure for a maximum period of 5 minutes. Beyond that time, the enclosure may automatically shut down to prevent damage. 38 Installing Enclosure Components