Dell PowerVault NX200 Hardware Owner's Manual - Page 125
Pull the backplane away from the front of the system until the securing
View all Dell PowerVault NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
5 Disconnect all of the cables connected to the SATA backplane including the SATA A cable, SATA B cable used for 3.5 inch hard drives, the backplane power cable, and the data cable. See Figure 3-23. 6 To remove the SATA backplane, pull the blue release pin and slide the backplane upwards. 7 Pull the backplane away from the front of the system until the securing slots are free from the tabs on the chassis. Figure 3-23. Removing and Installing a SATA Backplane 3 1 2 6 1 power cable 3 blue release pin 5 SATA backplane 4 5 2 SATA A cable 4 J_planar cable 6 hard drive Installing System Components 123
Installing System Components
123
5
Disconnect all of the cables connected to the SATA backplane including
the SATA A cable, SATA B cable used for 3.5 inch hard drives, the
backplane power cable, and the data cable. See Figure 3-23.
6
To remove the SATA backplane, pull the blue release pin and slide the
backplane upwards.
7
Pull the backplane away from the front of the system until the securing
slots are free from the tabs on the chassis.
Figure 3-23.
Removing and Installing a SATA Backplane
1
power cable
2
SATA A cable
3
blue release pin
4
J_planar cable
5
SATA backplane
6
hard drive
3
2
4
5
6
1