Dell PowerVault NX200 Hardware Owner's Manual - Page 34
E2111 SBE log, Error on DIMM
![]() |
View all Dell PowerVault NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Table 1-1. LCD Status Messages (continued) Code Text Causes Corrective Actions E2023 BIOS unable The system BIOS could to mirror not enable memory memory. Check mirroring because of a DIMMs. faulty memory module or an invalid memory configuration. See "Troubleshooting System Memory" on page 137. E2110 Multibit The memory module in See "Troubleshooting Error on DIMM slot "##" has had a multi- System Memory" on ##. Reseat bit error (MBE). page 137. DIMM. E2111 SBE log disabled on DIMM ##. Reseat DIMM. The system BIOS has Remove AC power to the disabled memory single-bit system for 10 seconds and error (SBE) logging and restart the system. will not log any more SBEs until the system is rebooted. "##" represents the memory module implicated by the BIOS. If the problem persists, see "Troubleshooting System Memory" on page 137. E2113 Mem mirror OFF on DIMM ## & ##. Power cycle AC. The system BIOS has Remove AC power to the disabled memory mirroring system for 10 seconds and because it has determined restart the system. one half of the mirror has had too many errors. "## & ##" represents the memory module pair implicated by the BIOS. If the problem persists, see "Troubleshooting System Memory" on page 137. I1910 Intrusion System cover has been detected. removed. Check chassis cover. Information only. 34 About Your System
![](/manual_guide/products/dell-powervault-nx200-hardware-owners-manual-4de93d7/34.png)