Dell PowerVault NX200 Hardware Owner's Manual - Page 78
Installing the Front Bezel, Front Bezel Inserts, Removing the Front Bezel Insert
![]() |
View all Dell PowerVault NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Installing the Front Bezel 1 Insert the bezel tabs into the bezel tab slots in the chassis. See Figure 3-2. 2 Press the top end of the bezel into the chassis until the lever locks into place. 3 Using the system key, lock the bezel. Front Bezel Inserts Removing the Front Bezel Insert NOTE: Before installing a drive in one or more of the front drive bays, remove the corresponding insert(s) on the front bezel. NOTE: Bezel inserts may contain screws on the inside. You can attach the screws to new drives, as needed. 1 Remove the front bezel. See "Removing the Front Bezel" on page 75. 2 Press the insert tab and pull the insert away from the bezel. See Figure 3-3. Figure 3-3. Removing and Installing the Front Bezel Insert 1 2 1 front bezel 3 insert tab 3 2 front bezel insert 76 Installing System Components
![](/manual_guide/products/dell-powervault-nx200-hardware-owners-manual-4de93d7/78.png)