Dell PowerVault NX200 Hardware Owner's Manual - Page 97
Installing a Power Supply, Removing and Replacing a Power Supply
View all Dell PowerVault NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Figure 3-12. Removing and Replacing a Power Supply 1 2 1 Power supply 2 screws (3) Installing a Power Supply 1 Open the system. See "Opening the System" on page 79. 2 Place the power supply in the chassis. Tighten the three screws to secure the power supply to the chassis. 3 Connect all cables to the system board and drives. 4 Replace the system cover. See "Closing the System" on page 80. Installing System Components 95
Installing System Components
95
Figure 3-12.
Removing and Replacing a Power Supply
Installing a Power Supply
1
Open the system. See "Opening the System" on page 79.
2
Place the power supply in the chassis. Tighten the three screws to
secure the power supply to the chassis.
3
Connect all cables to the system board and drives.
4
Replace the system cover. See "Closing the System" on page 80.
1
Power supply
2
screws (3)
2
1