Dell PowerVault NX200 Hardware Owner's Manual - Page 41
Warning: Memory, See General Memory
![]() |
View all Dell PowerVault NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Table 1-2. System Messages (continued) Message Maximum rank count exceeded. The following DIMM has been disabled: x Memory address line failure at address, read value expecting value Memory double word logic failure at address, read value expecting value Memory Initialization Warning: Memory size may be reduced Memory odd/even logic failure at address, read value expecting value Memory write/read failure at address, read value expecting value Causes Corrective Actions Invalid memory configuration. The system will run but with the specified memory module disabled. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 98. Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 137. Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 137. Invalid memory Ensure that the memory configuration. The system modules are installed in a will run but with less memory valid configuration. than is physically available. See "General Memory Module Installation Guidelines" on page 98. Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 137. Faulty or improperly installed See "Troubleshooting System memory modules. Memory" on page 137. About Your System 41
![](/manual_guide/products/dell-powervault-nx200-hardware-owners-manual-4de93d7/41.png)