Dell PowerVault NX200 Hardware Owner's Manual - Page 31
E2013 BIOS unable, E2014 CMOS RAM
![]() |
View all Dell PowerVault NX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Table 1-1. LCD Status Messages (continued) Code Text Causes Corrective Actions E2011 Memory configuratio n failure. Check DIMMs. Memory detected, but is not configurable. Error detected during memory configuration. See "Troubleshooting System Memory" on page 137. E2012 Memory Memory configured, configured but is unusable. but unusable. Check DIMMs. See "Troubleshooting System Memory" on page 137. E2013 BIOS unable The system BIOS failed to shadow to copy its flash image memory. Check into memory. DIMMs. See "Troubleshooting System Memory" on page 137. E2014 CMOS RAM failure. Power cycle AC. CMOS failure. CMOS RAM not functioning properly. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 157. E2015 DMA Controller failure. Power cycle AC. DMA controller failure. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 157. E2016 Interrupt Controller failure. Power cycle AC. Interrupt controller failure. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 157. About Your System 31
![](/manual_guide/products/dell-powervault-nx200-hardware-owners-manual-4de93d7/31.png)