Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.5 - Page 1103

Field Description inbound/outbound Encryption policy applied to inbound or outbound traffic. esp spi Security policy index number used to identify the policy. transform Security algorithm that is used to provide authentication, integrity, and confidentiality. in use settings Transform that the SA uses (only transport mode is supported). replay detection support Y: An SA has enabled the replay detection feature. N: The replay detection feature is not enabled. STATUS ACTIVE: The authentication or encryption policy is enabled on the interface. show ipv6 ospf database Display information in the OSPFv3 database, including link-state advertisements (LSAs) in detail. Syntax Parameters show ipv6 ospf [process-number] [vrf vrf-name] database [database-summary | grace-lsa | external | inter-area-prefix | inter-area-router | intra-areaprefix | link | network | router | nssa-external] process-number vrf vrf-name Enter the OSPF process number. (Optional) Enter the keyword vrf followed by the name of the VRF to display neighbors corresponding to that VRF. NOTE: If you do not specify this option, neighbors corresponding to the default VRF are displayed. databasesummary external grace-lsa inter-area-prefix inter-area-router intra-area-prefix link network nssa-external router (OPTIONAL) Enter the keyword database-summary to view a summary of database LSA information. (OPTIONAL): Enter the keyword external to display the external link states. (OPTIONAL): Enter the keyword grace-lsa to display the Type-11 Grace LSAs sent and received on an OSPFv3 router. (OPTIONAL): Enter the keyword inter-area-prefix to display the inter area prefix link states. (OPTIONAL): Enter the keyword inter-area-router to display the inter area router link states. (OPTIONAL): Enter the keyword intra-area-prefix to display the intra area prefix link states. (OPTIONAL): Enter the keyword link to display the link states. (OPTIONAL): Enter the keyword network to display the network link states. (OPTIONAL): Enter the keyword nssa-external to display the nssa link state information. (OPTIONAL): Enter the keyword router to display the router link states. Defaults Command Modes None EXEC EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Open Shortest Path First (OSPFv2 and OSPFv3) 1103