Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.5 - Page 1428

Parameters name name] | access-list-name [ipv6 ipv6-access-list-name | access-list-name | security-name name]]] To remove access to a community, use the no snmp-server community community-string {ro | rw} [security-name name [access-list-name | ipv6 access-list-name | accesslist-name ipv6 access-list-name]] command. community-name ro rw ipv6 access-listname security-name name access-list-name Enter a text string (up to 20 characters long) to act as a password for SNMP. Enter the keyword ro to specify read-only permission. Enter the keyword rw to specify read-write permission. (Optional) Enter the keyword ipv6 then an IPv6 ACL name (a string up to 16 characters long). (Optional) Enter the keywords security-name then the security name as defined by the community MIB. (Optional) Enter a standard IPv4 access list name (a string up to 16 characters long). Defaults none Command Modes CONFIGURATION Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.19.0 8.3.11.1 8.3.7.0 7.6.1.0 7.5.1.0 6.2.1.1 Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the S4820T. Introduced on the Z9000. Introduced on the S4810. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information The following example configures a community named public that is mapped to the security named guestuser with Read Only (ro) permissions. The security-name parameter maps the community string to an SNMPv3 user/security name as defined by the community MIB. If a community string is configured without a security-name (for example, snmp-server community public ro), the community is mapped to a default security-name/group: • v1v2creadu / v1v2creadg - maps to a community with ro (read-only) permissions. • v1v2cwriteu/ v1v2cwriteg - maps to a community with rw (read-write) permissions. The community-name parameter indexes this command. 1428 Simple Network Management Protocol (SNMP) and Syslog