Dell S3100 EMC Command Line Reference Guide for the Series 9.14.2.5 - Page 210

Related Commands 1 0000000000000000 1111110000000000 0 Total Ports: 1024 1023 1024 • ip access-list extended - create an extended ACL. • permit - assign a permit filter for IP packets. • permit tcp - assign a permit filter for TCP packets. resequence access-list Re-assign sequence numbers to entries of an existing access-list. Syntax Parameters resequence access-list {ipv4 | mac} {access-list-name StartingSeqNum Step-toIncrement} ipv4 | mac access-list-name StartingSeqNum Step-toIncrement Enter the keyword ipv4or mac to identify the access list type to resequence. Enter the name of a configured IP access list, up to 140 characters. Enter the starting sequence number to resequence. The range is from 0 to 4294967290. Enter the step to increment the sequence number. The range is from 1 to 4294967290. Defaults Command Modes None • EXEC • EXEC Privilege Command History This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS Command Line Reference Guide. Version Description 9.10(0.1) 9.10(0.0) 9.10(0.0) 9.8(2.0) 9.8(1.0) 9.8(0.0P5) 9.8(0.0P2) 9.7(0.0) 9.2(1.0) 9.0.2.0 8.3.11.1 8.1.1.0 7.8.1.0 7.6.1.0 7.5.1.0 7.4.1.0 Introduced on the S6010-ON and S4048T-ON. Introduced on the S3148. Introduced on the S6100-ON. Introduced on the S3100 series. Introduced on the Z9100-ON. Introduced on the S4048-ON. Introduced on the S3048-ON. Introduced on the S6000-ON. Introduced on the Z9500. Introduced on the S6000. Introduced on the Z9000. Introduced on the E-Series (IPv4). Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to 16 characters long. Introduced on the S-Series. Introduced on the C-Series. Introduced on the E-Series. Usage Information When all sequence numbers are exhausted, this feature permits re-assigning a new sequence number to entries of an existing access-list. 210 Access Control Lists (ACL)