Dell S6000 FTOS 9.0(2.0) Configuration Guide for the System - Page 46

www.dell.com | support.dell.com Figure 3-6. Tracking Changes with Configuration Comments FTOS#show running-config Current Configuration ... ! Version 9.0(2.0) ! Last configuration change at Tue Apr 12 21:21:59 2011 by default ! Startup-config last updated at Tue Apr 5 00:16:05 2011 by default ! boot system stack-unit 0 primary system: A: boot system stack-unit 0 secondary system: B: boot system stack-unit 0 default tftp://10.16.127.35/ftos-s6000.bin boot system gateway 192.168.1.2 ! redundancy auto-synchronize full ! hardware watchdog stack-unit 0 hardware watchdog stack-unit 1 hardware watchdog stack-unit 2 hardware watchdog stack-unit 3 hardware watchdog stack-unit 4 hardware watchdog stack-unit 5 ! hostname FTOS ! stack-unit 0 provision S6000 ! --More-- File System Management The Dell Networking system can use the internal Flash, external Flash, or remote devices to store files. It stores files on the internal Flash by default but can be configured to store files elsewhere. To view file system information: Task View information about each file system. Command Syntax show file-systems Command Mode EXEC Privilege The output of the command show file-systems (Figure 3-7) shows the total capacity, amount of free memory, file structure, media type, read/write privileges for each storage device in use. Figure 3-7. show file-systems Command Example FTOS#show file-systems Size(b) Free(b) 6429872128 6397476864 15775404032 15775399936 - - - - - - FTOS# Feature Type FAT32 USERFLASH FAT32 USBFLASH - network - network - network Flags rw rw rw rw rw Prefixes flash: usbflash: ftp: tftp: scp: 24 | Getting Started