Dell S6000 FTOS 9.0(2.0) Configuration Guide for the System - Page 59

To have FTOS include a timestamp with the syslog message, use the following command syntax in the CONFIGURATION mode: Command Syntax Command Mode Purpose service timestamps [log | debug] [datetime [localtime] [msec] [show-timezone] | uptime] CONFIGURATION Add timestamp to syslog messages. Specify the following optional parameters: • datetime: You can add the keyword localtime to include the localtime, msec, and show-timezone. If you do not add the keyword localtime, the time is UTC. • uptime. To view time since last boot. If neither parameter is specified, FTOS configures uptime. To view the configuration, use the show running-config logging command in the EXEC privilege mode. To disable time stamping on syslog messages, enter no service timestamps [log | debug]. File Transfer Services With FTOS, you can configure the system to transfer files over the network using File Transfer Protocol (FTP). One FTP application is copying the system image files over an interface on to the system; however, FTP is not supported on VLAN interfaces. For more information on FTP, refer to RFC 959, File Transfer Protocol. Configuration Task List for File Transfer Services The following list includes the configuration tasks for file transfer services: • Enable FTP server (mandatory) • Configure FTP server parameters (optional) • Configure FTP client parameters (optional) For a complete listing of FTP related commands, refer to the FTOS Command Line Reference Guide, Control and Monitoring chapter. Enable FTP server To enable the system as an FTP server, use the following command in the CONFIGURATION mode: Command Syntax ftp-server enable Command Mode CONFIGURATION Purpose Enable FTP on the system. Management | 37