Dell S6000 FTOS 9.0(2.0) Configuration Guide for the System - Page 47

You can change the default file system so that file management commands apply to a particular device or memory. To change the default storage location: Task Change the default directory. Command Syntax cd directory Command Mode EXEC Privilege In Figure 3-8, the default storage location is changed to the external Flash of the primary RPM. File management commands then apply to the external Flash rather than the internal Flash. Figure 3-8. Alternative Storage Location FTOS#cd usbflash: FTOS#copy running-config test FTOS#copy run test ! 7419 bytes successfully copied FTOS#dir Directory of usbflash: No File System Specified 1 drw2 drwx 3 ---4 -rw5 ---6 ---7 ---8 ---9 ---- 32768 512 0 7419 0 0 0 0 0 Jan 01 1980 00:00:00 Jul 23 2007 00:38:44 Jan 01 1970 00:00:00 Jul 23 2007 20:44:40 Jan 01 1970 00:00:00 Jan 01 1970 00:00:00 Jan 01 1970 00:00:00 Jan 01 1970 00:00:00 Jan 01 1970 00:00:00 . .. DCIM test BT 200702~1VSN G F F File Saved to External Flash usbflash: 127772672 bytes total (21927936 bytes free) View command history The command-history trace feature captures all commands entered by all users of the system with a time stamp and writes these messages to a dedicated trace log buffer. The system generates a trace message for each executed command. No password information is saved to the file. To view the command-history trace, use the show command-history command, as shown in Figure 487. Figure 3-9. Command Example show command-history FTOS#show command-history [12/5 10:57:8]: CMD-(CLI):service password-encryption [12/5 10:57:12]: CMD-(CLI):hostname FTOS [12/5 10:57:12]: CMD-(CLI):ip telnet server enable [12/5 10:57:12]: CMD-(CLI):line console 0 [12/5 10:57:12]: CMD-(CLI):line vty 0 9 Getting Started | 25