Dell S6000 FTOS 9.0(2.0) Configuration Guide for the System - Page 799

To configure system contact and location information from the Dell Networking system: Task Command Identify the system manager along with this person's contact information (e.g E-mail address or phone number). You may use up to 55 characters. Default: None snmp-server contact text Identify the physical location of the system. For example, San Jose, 350 Holger Way, 1st floor lab, rack A1-1. You may use up to 55 characters. Default: None snmp-server location text To configure the system from the manumitting station using SNMP: Command Mode CONFIGURATION CONFIGURATION Task Command Command Mode Identify the system manager along with this person's contact information (e.g E-mail address or phone number). You may use up to 55 characters. Default: None snmpset -v version -c community agent-ip sysContact.0 s "contact-info" CONFIGURATION Identify the physical location of the system. For example, San Jose, 350 Holger Way, 1st floor lab, rack A1-1. You may use up to 55 characters. Default: None snmpset -v version -c community agent-ip sysLocation.0 s "location-info" CONFIGURATION Subscribe to Managed Object Value Updates using SNMP By default, the Dell Networking system displays some unsolicited SNMP messages (traps) upon certain events and conditions. You can also configure the system to send the traps to a management station. Traps cannot be saved on the system. FTOS supports the following three sets of traps: • RFC 1157-defined traps: coldStart, warmStart, linkDown, linkUp, authenticationFailure, egpNeighbborLoss • Dell Networking enterpriseSpecific environment traps: fan, supply, temperature • Dell Networking enterpriseSpecific protocol traps: bgp, ecfm, stp, xstp, Simple Network Management Protocol (SNMP) | 777