Epson 836XL User Setup Information - Page 18

Install the SCSI Interface Board - scanner driver

Get Epson 836XL - Expression - Flatbed Scanner PDF manuals and user guides
UPC - 010343820098
View all Epson 836XL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Install the SCSI Interface Board You must install your SCSI board before installing the scanner driver and software applications. If you have a Macintosh with a SCSI interface, or if you already have a SCSI board installed in your PC, skip this section. For additional installation information, see your computer documentation. 1. Turn off the computer and any peripheral devices. Unplug any power cords; then disconnect all cables from the back panel of your computer. 2. Remove the cover from your computer (or open up your Macintosh G3). Static electricity can damage electronic components. Ground yourself before you touch any of the computer's internal components by touching an unpainted metal surface inside the computer case. 3. Remove the slot cover from an empty PCI expansion slot in your computer. (Refer to your computer documentation for information about your PCI slots.) 4. Insert the interface board into the slot; then secure it with the bracket screw. 5. Replace the computer cover and reconnect all cables. 6. Continue with the following section, "Unlock the Scanner." 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
12
Install the SCSI Interface Board
You must install your SCSI board before installing the scanner driver and software
applications.
If you have a Macintosh with a SCSI interface, or if you already have a SCSI board
installed in your PC, skip this section.
For additional installation information, see your computer
documentation.
1.
Turn off the computer and any peripheral devices. Unplug any power cords; then
disconnect all cables from the back panel of your computer.
2.
Remove the cover from your computer (or open up your Macintosh G3).
Static electricity can damage
electronic components.
Ground yourself before you
touch any of the computer’s
internal components by
touching an unpainted metal
surface inside the computer
case.
3.
Remove the slot cover from an empty PCI
expansion slot in your computer. (Refer to
your computer documentation for
information about your PCI slots.)
4.
Insert the interface board into the slot; then
secure it with the bracket screw.
5.
Replace the computer cover and reconnect
all cables.
6.
Continue with the following section, “Unlock the Scanner.”