Epson ActionNote 4SLC/33 User Manual - Page 123

Diskette Drive Problems, Hard Disk Problems, contact your Authorized Epson Servicer.

Get Epson ActionNote 4SLC/33 PDF manuals and user guides View all Epson ActionNote 4SLC/33 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 123 highlights

Diskette Drive Problems If you are having problems with the diskette drive, check the following 1. If the drive does not seem to be working as it should, try performing a similar operation with a diskette in another computer's drive, if you have access to one. 2. If the drive is making loud or unusual noises, stop the current operation immediately. If the problem continues, contact your Authorized Epson Servicer. 3. You can run a diagnostic check for the diskette drive; see Chapter 6 for instructions. Hard Disk Problems If you have problems with your hard disk drive, check the following: 1. Check the hard disk drive light. If you enter commands (such as COPY) to access the hard disk, the light should be on when the computer accesses the drive. If the light is blinking, there may be a problem with the hard disk. Contact your Authorized Epson Servicer if this occurs. 2. If you have set a time-out for the hard disk in the Setup program and it has timed out, the hard disk drive requires about 15 seconds to come backup to speed when you access it again. 3. Make sure you have formatted the hard disk correctly for MS-DOS or the operating system you are using. See the instructions in your operating system manual. A-10 Troubleshooting

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
Diskette Drive Problems
If you are having problems with the diskette drive, check the
following
1. If the drive does not seem to be working as it should, try
performing a similar operation with a diskette in another
computer’s drive, if you have access to one.
2. If the drive is making loud or unusual noises, stop the
current operation
immediately. If the problem continues,
contact your Authorized Epson Servicer.
3. You can run a diagnostic check for the diskette drive; see
Chapter 6 for instructions.
Hard
Disk
Problems
If you have problems with your hard disk drive, check the
following:
1.
2.
3.
Check the hard disk drive light. If
you enter commands
(such as COPY) to access the hard disk, the light should be
on when the computer accesses the drive. If the light is
blinking, there may be a problem with the hard disk.
Contact your Authorized Epson Servicer if this occurs.
If you have set a time-out for the hard disk
in the Setup
program and it has timed out, the hard disk drive requires
about 15 seconds to come backup to speed when you
access it again.
Make sure you have formatted the hard disk correctly for
MS-DOS or the operating system you are using. See the
instructions in your operating
system manual.
A-10 Troubleshooting