Epson ActionNote 4SLC/33 User Manual - Page 30
RUN SETUP UTILITY, Press <F1> to RESUME, Depending on your configuration, your computer may come
View all Epson ActionNote 4SLC/33 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
If the tests indicate a problem with the system, you will see an error message followed by this prompt: RUN SETUP UTILITY Press to RESUME If this happens, press to run the Setup program and check your system configuration. See Chapter 5 for a complete description of the Setup program. When the computer completes its testing, it displays a screen describing the system's configuration If necessary, press the button on the keyboard to view the configuration screen. After viewing the screen, press any key to continue the startup process. Because your computer was set up at the factory, the configuration information should be accurate. If you have changed the computer's setup so that this information does not match your configuration, run the Setup program described in Chapter 5 to correct it. Depending on your configuration, your computer may come with MS-DOS and Microsoft Windows installed on the hard disk. However, you can use another operating system, such as OS/2,® UNIX,® or XENIX.® Although this manual includes sample MS-DOS commands, it does not explain how to use the operating system; see your MS-DOS or other operating system manuals for complete instructions. 1-12 Setting Up the Computer