Epson C4100 Reference Manual - Page 198
Removing the Hard Disk Drive
View all Epson C4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
10. Plug the printer's power cord into an electrical outlet. 11. Turn on the printer. To confirm that the Hard Disk Drive is installed correctly, use the printer's control panel menus to print a status sheet. See "Printing a Status Sheet" on page 267 for instructions. If the drive is not listed on the status sheet, try reinstalling the drive. Make sure that the connector on the Hard Disk Drive is securely connected to the socket on the circuit board. Note: If you are using Windows, and EPSON Status Monitor 3 is not installed, you have to make settings manually in the printer driver. Click the Update the Printer Option Information Manually button on the Optional Settings menu, then click Settings. Then select the Optional HDD Unit check box on the Optional Settings dialog box and click OK. Removing the Hard Disk Drive Follow these steps to remove the Hard Disk Drive: c Caution: Before you remove the Hard Disk Drive, be sure to discharge any static electricity by touching a grounded piece of metal. Otherwise, you may damage static-sensitive components. w Warning: Be careful when working inside the printer as some components are sharp and may cause injury. 1. Turn the printer off and unplug the power cord. 2. Remove all interface cables from the interface connectors. 198 Installing Options