Epson C4100 Reference Manual - Page 221
Replacing Consumable Products, Replacement Messages - transfer unit
View all Epson C4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Chapter 7 Replacing Consumable Products 7 7 Replacement Messages 7 When you see the following messages on the LCD panel or the 7 window of EPSON Status Monitor 3, replace the appropriate consumable products. You can continue to print for a short time after a message appears, but EPSON recommends early replacement to maintain print quality and extend the life of your printer. 7 Note: 7 Do not replace the toner cartridge when the XXXX Toner Low message appears. Toner remaining in the toner cartridge may spill out if you remove the toner cartridge to replace it. Replace the toner cartridge when the Replace Toner xxxx message appears. 7 LCD Panel Description Message 7 Worn The photoconductor unit has Photoconductor reached the end of its service Worn Fuser life. The fuser unit has reached the 7 end of its service life. Worn Transfer Unit The transfer unit is near the end of its service life. 7 Note: To clear the warning, select Clear All Warning from the control 7 panel's Reset Menu. 7 Replacing Consumable Products 221