Epson C4100 Reference Manual - Page 270
not properly set up for your, Make sure that the printer is selected
View all Epson C4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
The interface cable may not be Check both ends of the interface cable plugged in securely. between the printer and the computer. If you are using the parallel interface, be sure to secure the connector using the wire retaining clips. You may not be using the correct interface cable. If you are using the parallel interface, make sure that the cable is a double-shielded, twisted-pair interface cable no more than six feet in length. If you are using the USB interface, use a Revision 2.0 cable. Some error may have occurred. Check the LCD panel to see if an error message appears. Your application software is not properly set up for your printer. Make sure that the printer is selected in your application software. Your computer system's Try reducing the image resolution of memory is too small to handle your document in the application the volume of data in your software, or install more memory in document. your computer if you can. 270 Troubleshooting