Epson C4100 Reference Manual - Page 296
Status and Error Messages, Calibrating Printer, Cancel All Print Job, Can't Print - al driver
View all Epson C4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
Status and Error Messages This section contains a list of error messages shown on the LCD panel, giving a brief description of each message and suggestions for correcting the problem. Note that not every message shown on the LCD panel indicates a problem. When the mark is displayed at the left of the warning message, multiple warnings occur. To confirm all warnings that occur, press the Down button to display the Status Menu, then press the Enter button. Calibrating Printer The printer automatically calibrates itself when any of its covers are opened and when there is no paper jammed inside. This is not an error message, and will clear itself within one minute. While the printer displays this message, do not open the covers or turn off the printer. Cancel All Print Job The printer is canceling all print jobs in the printer memory, including jobs the printer is currently receiving or printing. This message appears when the q Cancel Job button has been pressed down for more than 2 seconds. Cancel Print Job The printer is canceling the current print job. This message appears when the q Cancel Job button has been pressed and released within 2 seconds. Can't Print The print data is deleted because it is incorrect. Make sure that the appropriate paper size is set and a printer driver for EPSON AL-C4100 is used. 296 Troubleshooting