Epson Ensemble HD 6500 User's Guide - Page 46

Adjusting the Sound To access the Audio menu, make sure the MAIN menu is displayed on the remote control, press the Menu button, then select Audio. You see this screen: Audio Video Language Preference Reset Voice Bass Treble Surround Front Distance Center Distance Rear Distance Test Tone Move 0 dB 0 dB 0 dB 0 dB 5 ft. 5 ft. 5 ft. Sel Enter Menu Exit You can adjust the following settings: • Voice Lets you adjust the volume of the center channel, which is mainly used for actors' voices in movies. • Bass Lets you adjust the volume at the lower end of the sound spectrum. This setting adjusts the bass sound from the left and right front channels and the subwoofer. • Treble Lets you adjust the volume at the higher end of the sound spectrum. • Surround Lets you adjust the volume from the rear (surround) speakers. • Front Distance Adjusts the sound delay from the left and right front speakers. Measure and enter the distance from your main seating location to the left and right speakers on the screen. • Center Distance Adjusts the sound delay from the front center speakers. Measure and enter the distance from your main viewing location to the speakers in the middle of the screen. • Rear Distance Adjusts the sound delay from the rear (surround) speakers. Measure and enter the distance from your main seating location to the rear speakers. • Test Tone Lets you check and adjust the sound level for each speaker. See the next section for details. Note You can also adjust the Voice, Bass, Treble, and Surround settings by selecting the AUDIO menu on the remote control, and then selecting TONE. Press TONE repeatedly to select each setting. 46