Epson Expression 636 User Manual - Page 19
until they lock in place on both sides., interface connector. Then squeeze the wire clips together
View all Epson Expression 636 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2. Connect the 25-pin end of the cable to the computer; then tighten the screws on the sides of the connector. 3. Plug the 36-pin end of the cable into the scanner's parallel interface connector. Then squeeze the wire clips together until they lock in place on both sides. Note: If your parallel cable has a ground wire, attack it to the scanner's ground terminal. Setting Up the Scanner 1-7
2.
Connect the 25-pin end of the cable to the computer; then
tighten the screws on the sides of the connector.
3.
Plug the 36-pin end of the cable into the scanner’s parallel
interface connector. Then squeeze the wire clips together
until they lock in place on both sides.
Note:
If your parallel cable has a ground wire, attack it to the scanner’s
ground terminal.
Setting Up the Scanner
1-7