Epson Expression 636 User Manual - Page 56

Interface error, Fatal error, Option error, Connecting the Scanner to Your Computer

Get Epson Expression 636 PDF manuals and user guides View all Epson Expression 636 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Interface error The interface setup is wrong, or the scanner is not properly connected to the computer. If this error occurs, check the interface connection. See "Connecting the Scanner to Your Computer" in Chapter 1. Then press the RESET button or turn the scanner off and back on to reset it. Fatal error This indicates one of the following problems: 0 The transportation lock lever is set to the LOCK position. 0 The fluorescent lamp needs to be replaced. 0 The scanner is broken. 0 There is a problem, such as an open cover, with the optional transparency unit or the optional automatic document feeder. Check that the transportation lock lever is set to the UNLOCK position and check any installed options; then press the RESET button. If the scanner still does not operate properly, try turning the scanner off and then back on. If it still does not operate properly, or if this error occurs repeatedly, consult your dealer. Option error This indicates a problem such as a paper jam with an installed option unit. Check the option unit and correct the problem. See Chapter 3, "Options." Troubleshooting 4-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Interface error
The interface setup is wrong, or the scanner is not properly
connected to the computer.
If this error occurs, check the interface connection. See
“Connecting the Scanner to Your Computer” in Chapter 1.
Then press the
RESET
button or turn the scanner off and back
on to reset it.
Fatal error
This indicates one of the following problems:
0
The transportation lock lever is set to the
LOCK
position.
0
The fluorescent lamp needs to be replaced.
0
The scanner is broken.
0
There is a problem, such as an open cover, with the
optional transparency unit or the optional automatic
document feeder.
Check that the transportation lock lever is set to the
UNLOCK
position and check any installed options; then press the
RESET
button. If the scanner still does not operate properly, try
turning the scanner off and then back on. If it still does not
operate properly, or if this error occurs repeatedly, consult
your dealer.
Option error
This indicates a problem such as a paper jam with an installed
option unit.
Check the option unit and correct the problem. See Chapter 3,
“Options.”
Troubleshooting 4-3