Epson PP-100II Users Guide for Mac - Page 106
Precautions for Transporting Your Product
View all Epson PP-100II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Precautions for Transporting Your Product When transporting your product, be sure to use the original box and protective materials to protect it from an impact or the like. See Setup Guide for Mac for details on the handling of protective materials. • Make sure that no discs remain inside the product. • For PP-100II, be sure to remove drive 1 and drive 2 before transporting. Otherwise, the drives and the PP-100II may be deformed or damaged. • Never remove ink cartridges currently in use. Otherwise, the print head may dry out, and printing may become no longer possible. • For PP-100II and PP-100, never remove maintenance box. Otherwise, ink may leak. • When attaching protective materials or transporting the product, do not tilt the product or turn it upside down. Make sure that it is oriented horizontally. • Be sure that the product is lifted by two people. The weight of this product is as follows. ∗PP-100II/PP-100: approximately 24.0 kg ∗PP-100AP: approximately 22.0 kg ∗PP-50: approximately 21.0 kg When this product is lifted, it should be lifted on both sides by two people holding the recesses on the sides as shown in the illustration on the left. Holding any part other than the ones indicated in the illustration on the left when carrying the product may result in damage to the product. In particular, carrying the product while the disc cover, ink cartridge cover, or Stacker 4 (only for PP-100II/PP-100/PP-100AP) is open may result in the product being dropped, or deformed and damaged. Furthermore, when putting down this product, take care not to trap a finger between the product and installation surface. • When lifting this product, make sure that, for example, you sufficiently bend your knees, and your posture is such that excessive stress is not placed on your body. An unnatural posture when lifting the product may result in an injury, or the product being damaged. • When moving the product, do not tilt it 10 or more degrees in a forward or backward direction, or a side direction. The dropping or the like of the product may result in an accident. • Do not place a heavy object on the top of the product. Subjecting this product to excessive force may result in a malfunction. However, for PP-100II, PP-100, and PP-100AP, it is possible to place one unit of this product on top of another. In such a case, make sure the tops and bottoms are oriented the same, and the exterior of the units are aligned. At the same time, take sufficient care to prevent a unit from dropping or falling. Also, do not place more than one unit on top of another. 106