Epson PP-100II Users Guide for Mac - Page 135
Disc Recording Surface is Stained with Ink, For PP-100II
View all Epson PP-100II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Troubleshooting Disc Recording Surface is Stained with Ink When the disc recording surface is stained with ink, the printer tray may be dirty. Clean the printer tray by following the procedure below. For PP-100II 1 Turn the product off. See "Turning Off the Power" on page 20. 2 After the Power light goes off, unplug the power plug from the outlet. 3 Remove the two screws to remove the maintenance box cover. 4 Grasp the fixture as shown in the figure below, and push the printer tray in the direction of the arrow indicated below. 5 Open the disc cover. 135
135
Troubleshooting
Disc Recording Surface is Stained with Ink
When the disc recording surface is stained with ink, the printer tray may be dirty. Clean the printer tray by following
the procedure below.
For PP-100II
1
Turn the product off.
See
“Turning Off the Power” on page 20
.
2
After the Power light goes off, unplug the power plug from the outlet.
3
Remove the two screws to remove the maintenance box cover.
4
Grasp the fixture as shown in the figure below, and push the printer tray in the direction of
the arrow indicated below.
5
Open the disc cover.