Epson PowerLite Pro G5650W Operation Guide - EasyMP Network Projection - Page 28
Procedure Before Using the Multi-screen Display Function, Setting the Virtual Display
View all Epson PowerLite Pro G5650W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Using Multi-Screen Display 28 Procedure Before Using the Multi-screen Display Function 1. Setting the Virtual Display s p.28 In a Windows environment, enable the virtual display g driver as necessary. Also, for both Windows and Mac OS, set up the virtual display arrangement. 2. Allocating the image to be projected s p.32 Open the file to be projected, and then move the screen to the virtual display according to the actual projection arrangement. 3. The allocated image is projected s p.33 Allocate a virtual display number to a projector that is connected through the network, and then start projection. Setting the Virtual Display This section explains the virtual display for arrangement example 1. s p.27 Enable the virtual display driver (Windows only) Enable the virtual display g driver. Those users listed below do not have to perform this operation and should skip to s "Adjusting the virtual display" p.29. • Those users who have enabled virtual displays installing EasyMP Network Projection • Mac OS users Procedure A Start Windows on the computer, and then select "Start" "Programs" (or "All Programs") - "EPSON Projector" "EasyMP Network Projection" - "Add-Remove EPSON Virtual Display". The Add-Remove EPSON Virtual Display screen is displayed. B Select the virtual display you want to use. Up to four monitors can be added. In this example, a single virtual display is to be used. When setting multiple virtual displays, select as many displays as is necessary. Any one of the displays can be selected. C Click "OK." When you click OK, the drivers for the virtual display are enabled. At this point, it is normal for the display to flicker. Wait for the Add-Remove EPSON Virtual Display screen to close.