Epson SureColor P800 Screen Print Edition Basics - Page 49

Notices, Important Safety Instructions

Page 49 highlights

Notices Important Safety Instructions Before using your Epson SureColor P800 Series printer, read and follow these safety instructions: ■ Be sure to follow all warnings and instructions marked on the printer. ■ Use only the type of power source indicated on the printer label. ■ Place the printer near a wall outlet where the plug can be easily unplugged. ■ If you won't be using the printer for a long period, unplug the power cord from the electrical outlet. ■ Always turn off the printer using the P power button, and wait until the P power light stops flashing before unplugging the printer or cutting off power to the electrical outlet. ■ Avoid plugging the printer into an outlet on the same circuit as a photocopier or air control system that regularly switches on and off, or on an outlet controlled by a wall switch or timer. ■ Do not let the power cord become damaged or frayed. ■ If you use an extension cord with the printer, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. ■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. ■ Leave enough room around the printer for sufficient ventilation. Do not block or cover openings in the printer case or insert objects through the slots. ■ Do not place the printer near a radiator or heating vent or in direct sunlight. ■ Do not use aerosol products that contain flammable gases inside or around the printer. Doing so may cause fire. ■ Place the printer on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted or at an angle. ■ Make sure the printer is at least 11 inches (280 mm) away from the wall. If printing on poster board, make sure the printer is at least 17 inches (430 mm) from the wall. ■ Be careful not to spill liquid on the printer. Notices 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55

Notices
49
Notices
Important Safety Instructions
Before using your Epson SureColor P800 Series printer, read and follow these safety
instructions:
Be sure to follow all warnings and instructions marked on the printer.
Use only the type of power source indicated on the printer label.
Place the printer near a wall outlet where the plug can be easily unplugged.
If you won’t be using the printer for a long period, unplug the power cord from the
electrical outlet.
Always turn off the printer using the
P
power button, and wait until the
P
power
light stops flashing before unplugging the printer or cutting off power to the electrical
outlet.
Avoid plugging the printer into an outlet on the same circuit as a photocopier or air
control system that regularly switches on and off, or on an outlet controlled by a wall
switch or timer.
Do not let the power cord become damaged or frayed.
If you use an extension cord with the printer, make sure the total ampere rating of the
devices plugged into the extension cord does not exceed the cord’s ampere rating.
Also, make sure the total ampere rating of all devices plugged into the wall outlet does
not exceed the wall outlet’s ampere rating.
Avoid locations that are subject to rapid changes in heat or humidity, shocks or
vibrations, or dust.
Leave enough room around the printer for sufficient ventilation. Do not block or
cover openings in the printer case or insert objects through the slots.
Do not place the printer near a radiator or heating vent or in direct sunlight.
Do not use aerosol products that contain flammable gases inside or around the
printer. Doing so may cause fire.
Place the printer on a flat, stable surface that extends beyond its base in all directions.
It will not operate properly if it is tilted or at an angle.
Make sure the printer is at least 11 inches (280 mm) away from the wall. If printing
on poster board, make sure the printer is at least 17 inches (430 mm) from the wall.
Be careful not to spill liquid on the printer.