Epson TM-H6000IV with Validation Technical Reference Guide - Page 32
Slip validation printing, Receipt printing 80 mm paper width, elements for dots 1 to 128, 129 to 256
![]() |
View all Epson TM-H6000IV with Validation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Slip (validation) printing 85.4 5.6 32.8 18.4 Bottom margin [units: mm (All the numeric values are typical.)] Receipt printing (80 mm paper width) 79.5 ± 0.5 72.2* 3.7 ± 2.0 [units: mm (*: typical)] • In 2-divided energizing, the print position within the printable area of the thermal elements for dots 1 to 256 and 257 to 512 is shifted approximately 0.07 mm {0.0028"} as shown in the figure below. 25 Approx. 0.07 mm 25 51 • In 4-divided energizing, the print position within the printable area of the thermal elements for dots 1 to 128, 129 to 256, 257 to 384, and 385 to 512 is shifted approximately 0.04 mm {0.0016"} as shown in the figure below. Approx. 0.04 mm 32
![](/manual_guide/products/epson-tmh6000iv-validation-technical-reference-guide-53ccca5/32.png)
32
Slip (validation) printing
Receipt printing (80 mm paper width)
•
In 2-divided energizing, the print position within the printable area of the thermal
elements for dots 1 to 256 and 257 to 512 is shifted approximately 0.07 mm {0.0028"} as
shown in the figure below.
•
In 4-divided energizing, the print position within the printable area of the thermal
elements for dots 1 to 128, 129 to 256, 257 to 384, and 385 to 512 is shifted
approximately 0.04 mm {0.0016"} as shown in the figure below.
85.4
5.6
32.8
18.4
Bottom margin
[units: mm (All the numeric values are typical.)]
[units: mm (*: typical)]
79.5 ± 0.5
72.2*
3.7 ± 2.0
25
25
51
Approx. 0.07 mm
Approx. 0.04 mm