Epson TM-H6000IV with Validation Technical Reference Guide - Page 48
For Parallel Interface
View all Epson TM-H6000IV with Validation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
For Parallel Interface DIP Switch Bank 1 SW Function 1-1 1-2 1-3 ∼ 1-8 Auto line feed Receive buffer capacity Reserved ON OFF Always enabled 45 bytes Always disabled 4 KB Fixed to OFF Initial setting OFF OFF OFF DIP Switch Bank 2 SW Function ON OFF 2-1 2-2 2-3 ∼ 2-4 2-5 ∼ 2-7 2-8 Handshaking (BUSY condition) Receive buffer full • Offline • Receive buffer full Reserved Fixed to OFF Selects print density See "Selecting the Print Density (DIP Switches 2-3/2-4)" on page 51. Reserved Fixed to OFF IF pin 31 reset signal Fixed to ON Initial setting OFF OFF OFF OFF ON For DIP switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 52. 48
48
For Parallel Interface
DIP Switch Bank 1
DIP Switch Bank 2
SW
Function
ON
OFF
Initial
setting
1-1
Auto line feed
Always enabled
Always disabled
OFF
1-2
Receive buffer capacity
45 bytes
4 KB
OFF
1-3
∼
1-8
Reserved
Fixed to OFF
OFF
SW
Function
ON
OFF
Initial
setting
2-1
Handshaking (BUSY condition)
Receive buffer full
•
Offline
•
Receive buffer full
OFF
2-2
Reserved
Fixed to OFF
OFF
2-3
∼
2-4
Selects print density
See
"Selecting the Print Density (DIP
Switches 2-3/2-4)" on page 51
.
OFF
2-5
∼
2-7
Reserved
Fixed to OFF
OFF
2-8
IF pin 31 reset signal
Fixed to ON
ON
For DIP switch 2-1 (BUSY condition), see also
"Selecting the BUSY Status" on page 52
.