Epson TM-H6000IV with Validation Technical Reference Guide - Page 47
DIP Switch Bank 2, Function, Initial, setting
View all Epson TM-H6000IV with Validation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 2 Setup DIP Switch Bank 2 SW Function ON OFF Initial setting • Offline 2-1 Handshaking (BUSY condition) Receive buffer full OFF • Receive buffer full Customer display (DM-D) 2-2 connection Connected Not connected OFF 2-3 ∼ 2-4 Selects print density See "Selecting the Print Density (DIP OFF Switches 2-3/2-4)" on page 51. 2-5 ∼ 2-6 Reserved Fixed to OFF OFF 2-7 I/F pin 6 reset signal Enabled Disabled OFF 2-8 IF pin 25 reset signal Enabled Disabled OFF 2 For DIP switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 52. 47
Chapter 2
Setup
47
2
DIP Switch Bank 2
SW
Function
ON
OFF
Initial
setting
2-1
Handshaking (BUSY condition)
Receive buffer full
•
Offline
•
Receive buffer full
OFF
2-2
Customer display (DM-D)
connection
Connected
Not connected
OFF
2-3
∼
2-4
Selects print density
See
"Selecting the Print Density (DIP
Switches 2-3/2-4)" on page 51
.
OFF
2-5
∼
2-6
Reserved
Fixed to OFF
OFF
2-7
I/F pin 6 reset signal
Enabled
Disabled
OFF
2-8
IF pin 25 reset signal
Enabled
Disabled
OFF
For DIP switch 2-1 (BUSY condition), see also
"Selecting the BUSY Status" on page 52
.