Epson TM-H6000IV with Validation Technical Reference Guide - Page 55
Connecting the serial interface RS-232 cable
View all Epson TM-H6000IV with Validation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 2 Setup Connecting the serial interface (RS-232) cable WARNING Be sure to turn off the power supply for both the printer and host computer before connecting the cables. Use a null modem serial cable to connect the printer. 1 Insert the interface cable connector firmly into the interface connector on the connector panel. 2 When using connectors equipped with screws, tighten the screws to secure the connectors firmly. 2 3 When using interface cables equipped with a grounding line, attach the ground line to the screw hole marked "FG" on the printer. 4 Connect the other end of the interface cable to the host computer. 55
Chapter 2
Setup
55
2
Connecting the serial interface (RS-232) cable
1
Insert the interface cable connector firmly into the interface connector
on the connector panel.
2
When using connectors equipped with screws, tighten the screws to
secure the connectors firmly.
3
When using interface cables equipped with a grounding line, attach the
ground line to the screw hole marked “FG” on the printer.
4
Connect the other end of the interface cable to the host computer.
WARNING
Be sure to turn off the power supply for both the printer and host computer before
connecting the cables.
Use a null modem serial cable to connect the printer.