Epson TM-H6000IV with Validation Technical Reference Guide - Page 60
Connecting the Ethernet interface cable
View all Epson TM-H6000IV with Validation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Connecting the Ethernet interface cable CAUTION • When LAN cables are installed outdoors, make sure devices without proper surge protection are cushioned by being connected through devices that do have surge protection. Otherwise, the devices can be damaged by lightning. • Never attempt to connect the customer display cable, drawer kick-out cable, or a standard telephone line cable to the 10/100BASE-T LAN connector. To use the Ethernet interface, the IP Address Setup Utility for UB-E02 is required. For detailed information about the setup methods, see the UB-E02 Technical Reference Guide. You can obtain the IP Address Setup Utility for UB-E02 and the UB-E02 Technical Reference Guide from one of the following URLs or ask your dealer: • For customers in North America, go to the following web site: http://www.epsonexpert.com/ • For customers in other countries, go to the following web site: http://www.epson-pos.com/ Connect a 10/100BASE-T cable to the 10/100BASE-T LAN connector by pressing firmly until the connector clicks into place. 10/100BASE-T LAN interface connector 016(146'.'%1//70+%#6+1075' -'+06'.'(10#05%*.755/ LED (Green) LED (Yellow) Switch Press down the switch for a while when the power is on to initialize to the factory settings. 60