Epson TM-H6000IV with Validation Technical Reference Guide - Page 89
NV Graphics Print Mode, Starting the NV graphics print mode
View all Epson TM-H6000IV with Validation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Chapter 3 Application Development Information NV Graphics Print Mode You can confirm the following information on the roll paper by running NV graphics print mode: • Capacity of the NV graphics • Used amount of the NV graphics • Unused capacity of the NV graphics • Number of NV graphics that are registered • Key code, number of dots in X direction, number of dots in Y direction • NV graphics data For detailed information about NV graphics, see "NV Graphics Memory" on page 22. Starting the NV graphics print mode Follow the steps below to run this mode. 1 Install the roll paper. 2 Close all covers and the receipt unit. 3 3 While pressing the Feed button, turn on the printer. (Keep pressing the button until the printer starts printing.) The printer starts printing the current status of the printer. With the Ethernet interface, before printing starts, it takes 6 seconds if the IP address is fixed and 13 seconds if the IP address is obtained with the automatic setting. (It may take longer, depending on the response time from the host.) When the printer finishes printing the printer status, the following message is printed and the Paper LED flashes. (The printer is now in the self-test wait mode.): "Select Modes by pressing Feed button. Continue SELF-TEST: Less than 1 second Mode Selection : 1 second or more" 4 Press the Feed button. (Keep pressing the button until the printer starts printing.) The printer starts printing instructions. 89