Epson TM-H6000IV with Validation Technical Reference Guide - Page 87
Starting the test print on slip paper, Insert slip paper.
View all Epson TM-H6000IV with Validation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 3 Application Development Information Starting the test print on slip paper Follow the steps below to start a test print on slip paper. 1 Close all covers and the receipt unit. 2 While pressing the Release button, turn on the printer. (Keep pressing the button until the Slip LED starts flashing.) The printer goes into the slip insertion waiting status. 3 Insert slip paper. The printer prints a rolling pattern on the slip paper, using only the built-in character set. For models with the endorsement printer, the printer prints on both sides of the paper. After printing the following message, the printer is initialized and returned to the normal mode. "*** completed***" Starting the test print on validation paper Follow the steps below to start a test print on validation paper. 3 1 Close all covers and the receipt unit. 2 While pressing the Feed button and the Release button, turn on the printer. (Keep pressing the buttons until the Slip LED starts flashing.) The printer goes into the validation insertion waiting status. 3 Insert validation paper. The printer prints a rolling pattern on the validation paper, using only the built-in character set. After printing the following message, the printer is initialized and returned to the normal mode. "*** completed***" 87