Epson TM-H6000IV with Validation Technical Reference Guide - Page 49
For Built-in USB Interface, Function, Factory, setting
![]() |
View all Epson TM-H6000IV with Validation manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 2 Setup For Built-in USB Interface DIP Switch Bank 1 SW Function ON OFF 1-1 1-2 1-3 ∼ 1-7 1-8 Auto line feed Receive buffer capacity Reserved Setting of USB power-saving function* Always enabled 45 bytes Always disabled 4 KB Fixed to OFF Disabled Enabled Factory setting OFF OFF OFF OFF *: Valid only when the system configuration is set so that the USB driver can support the USB power-saving function. 2 DIP Switch Bank 2 SW 2-1 2-2 2-3 ∼ 2-4 2-5 ∼ 2-7 2-8 Function ON OFF Handshaking (BUSY condition) Receive buffer full • Offline • Receive buffer full Customer display (DM-D) connection Connected Not connected Selects print density See "Selecting the Print Density (DIP Switches 2-3/2-4)" on page 51. Reserved Fixed to OFF Reserved Fixed to ON Factory setting OFF OFF OFF OFF ON For DIP switch 2-1 (BUSY condition), see also "Selecting the BUSY Status" on page 52. 49
![](/manual_guide/products/epson-tmh6000iv-validation-technical-reference-guide-53ccca5/49.png)